Difference Between Fiber And Co2 Laser Cutting Machine
Difference Between Fiber And Co2 Laser Cutting Machine. In all thicknesses, including stainless and aluminum, the co2 cuts with finer edge quality. The main difference that determines the type of materials each laser can process is the wavelength.
When cutting materials as thick as 6mm, the cutting speed of a 1.5kw fiber laser cutting machine is equivalent to that of a 3kw co2 laser cutting machine. A fiber laser with a wavelength of 1.06 μm is readily absorbed by metals, and a very small portion of the rays are reflected. Smaller focusing spot, finer cutting lines, higher work efficiency and better processing quality;
The Carbon Dioxide Laser Cutting Machine Uses Gas As The Luminous Medium.
In all thicknesses, including stainless and aluminum, the co2 cuts with finer edge quality. Compared with the same 4 kw co 2 machine, the fiber laser is three times quicker in a straight line cutting of 1 mm mild, galvanized, or stainless steel and twice as fast when cutting 2 mm. A co 2 laser beam is absorbed by the plastic coating therefore only one cut pass is required.
The Actual Utilization Rate Of Each Power Supply Unit Of The Co2 Laser Cutting Machine Is About 8% To 10%.
The primary difference between a co 2 laser and a fiber laser is in their wavelengths. However, fiber laser cutting machine require almost no maintenance. An attractive difference between fiber and co2 laser cutting machines that makes fiber laser cutters especially attractive is that fiber laser cutters are more efficient and require far less maintenance than co2 laser cutting machines.
The Maintenance Cost Of Fiber Laser Cutting Machine Is Lower.
The actual general utilization rate of each power unit of co2 laser cutting machine is about 8% to 10%, while that of optical fiber laser cutting machine is about 25% to 30%. The advantages of fiber laser cutting machine compared to co2 laser cutting machine: The working principle of co2 laser is:
This Text May Need 10 Minutes To Read, And You Will Know The Basic Difference Between A Co2 Laser Cutter And A Fiber Laser Cutter.
The co2 laser is a gas beam obtained by excitation of carbon dioxide molecules, and its wavelength is 10.6μm, while the fiber laser is a solid laser obtained by placing a crystalline yb (ytterbium) compound as a medium in optical fiber and irradiating the crystals with a light beam, and its wavelength is 1.08μm. Ad swiss engineered, high speed fiber laser capable of cutting a variety of metal plates! As an example a 4kw co2 in 16 ga mild steel using n2 as a cutting gas has a recommended cutting speed of just 260ipm whereas an equally equipped fiber laser has a cutting speed of approximately 1,417 ipm, quite a difference.
Fiber Laser Cutting Is More Environmentally Friendly And Convenient On Machine Maintenance Issues.
The speed necessary to complete the project is sometimes a primary consideration. The main difference that determines the type of materials each laser can process is the wavelength. The beam of a fiber laser is typically half the size of a co2 system laser beam and can create a cutting kerf as small as.004”.
Post a Comment for "Difference Between Fiber And Co2 Laser Cutting Machine"