How To Remove Lid Of Hotpoint Washing Machine
How To Remove Lid Of Hotpoint Washing Machine. Open the lid of the washer and remove the washer casing. With the palms of your hands, smack the front corners to move the lid rearward.
Remove the agitator (the column in the middle of the washing machine tub). I have removed the 2 screws at the rear but cannot see. I have pushed it quite hard from the front to see if it will slide backwards but it wont.
How To Remove Washing Machine Top?
Lift it until it stays up by itself or until. Then, proceed with the following steps: I have undone the 2 screws at the back of the machine but the top wont budge.
The Plastic Can Sometimes Break On The Handle Or The Door Lock May Have Failed.
You will need to take the lid off to gain access to the door lock from the back to open it see our. Replace the dust cap, if necessary. It may be sticky, but with a little effort the front of the top of the machine should lift up, like a clam shell.
Yes Rob, One At Either Side On The Back.
This can be a problem especially when most lids are needed to start and stop the. I've tried pushing forward / pulling backward :mad::mad::mad::mad::mad::mad: I have fallen at the first hurdle, i can't remove the top off the machine.
Make Sure That Your Washing Machine Is Turned Off, The Water Supply Is Disconnected, And You’ve Gained Access To The Lid Lock Switch.
Put the lid back down and plug the washing machine back into the electrical outlet. I have pushed it quite hard from the front to see if it will slide backwards but it wont. I need to replace the door seal on my hotpoint ultima wt761 washing machine.
In The Manual There Is A Detailed Diagram Of All Fasteners Of The Machine.
Any ideas would be greatly appreciated With the palms of your hands, smack the front corners to move the lid rearward. I have removed the 2 screws at the rear but cannot see.
Post a Comment for "How To Remove Lid Of Hotpoint Washing Machine"