Cotton Candy Machine Instructions
Cotton Candy Machine Instructions. With main switch still off, fill floss head. Floss sugar and cones can be purchased from us.
In some cases, the sugar can cause the cap and band to stick together. These items burn on the ribbons. Please be sure to return mesh insert, bowl, cotton candy machine, bubble cover & 6 clips with plastic bowl, or 3 loose clips plus the 3 clips that are attached to bubble with the metal bowl.
The Spinner Head Will Not Start To Rotate.
Please make sure the unit runs smoothly before proceeding. Approximately 30 seconds you will have delicious cotton candy ! Be sure outlet accepts three (3) prong grounded plug.
(Candy Switch Is Located On The Front Of The Machine) Operating Instructions.
Make sure the floss ribbon (heating element) located inside the head assembly has not shaken out of the band during. The nostalgia cotton candy machine is everyone's favorite little home use machine. Hold an inch or two of the pointed end of a cone between two fingers and a thumb.
The Machine Weighs 49 Lbs.
Use a candy stick or. It takes two hard candies or a. The machine weighs 49 lbs.
Extension Cords May Create A Safety Hazard And Reduce Its Performance.
With the candy (heat) switch “off”, turn the power switch “on”. Do not touch the head as it is very hot. Place the machine on a.
And Its Dimensions Are 22” X 16” X 18”.
With a light flicking action, roll cone in the web of floss building up in the pan. Lift the cone up with the ring of floss attached and rotate the cone to wrap the floss. (please follow the directions below to make cotton candy for your event) 1.
Post a Comment for "Cotton Candy Machine Instructions"