Using Large Spools Thread Sewing Machine
Using Large Spools Thread Sewing Machine. 2) keep the spare bobbin winder empty so that no other loose thread will interfere with the movement of the thread. A spool cap that’s slightly larger than the width of the thread on the spool is then placed on top.
These threads are wound in such a way that they are meant to be fed off the top of the spool/cone without any interference from a spool cap. Check out our large sewing spool selection for the very best in unique or custom, handmade pieces from our shops. This is helpful because it allows you, the sewist, to use spools that are larger than your machine holds or that are shaped or wound differently than your machine supports.
Thin Spool With Spool Cap.
When i was happy with the shape i gave the bundled wire a good squeeze with the pliers. If the spool is too large for your machine you can use a thread stand behind your machine. It’s used to hold spools of thread in varying shapes and sizes.
It Also Has Less Lint, And Thus Your Machine Does Not Clog Up Quickly.
On top of that, a serger thread needs to travel through the serger at high speed. If you use a separate cone stand, that's great. 4) when moving the thread from one location to another, always hold the thread firmly.
I Used Needle Nose Pliers To Wrap It As Tight As I Could And Create A Hook On One End.
These threads are wound in such a way that they are meant to be fed off the top of the spool/cone without any interference from a spool cap. Next i ran the wire through the small hole on the long dowel. It appears to be possible to use serger thread on your sewing machine.
For Regular Machine Piecing, Hand Piecing, Needle Turn Appliqué, English Paper Piecing, Machine Appliqué, Machine Quilting And Basting;
3) always keep the thread taut as you move it around. A spool cap that’s slightly larger than the width of the thread on the spool is then placed on top. Now, with your middle and index fingers, hold the cone gently, and press the foot pedal.
Shiny Thread Might Not Be Suitable For All Projects.
When a thin spool is used on the thread stand a spool felt is first placed on the pin so that the center of the spool is aligned with the hole in the felt. 2) keep the spare bobbin winder empty so that no other loose thread will interfere with the movement of the thread. 8 × 4 × 4 in.
Post a Comment for "Using Large Spools Thread Sewing Machine"