Brother Embroidery Machine Tension Problem

Brother Embroidery Machine Tension Problem. The upper thread tension is changed using the thread tension dial. Press to weaken the upper thread.

Bobbin tension problems solved on Brother embroidery machines. YouTube from www.youtube.com

This tells you that the top yarn was so tight that it started to pull the bobbin thread through the holes and can even cause the fabric to fray. Correct position of needlebar thread guide; Bobbin tension (otherwise called bottom tension) is usually set at a factory for all standard sewing threads.

Source: www.youtube.com

The post is threaded and also has a machine out halfway above the shaft. The lower thread is visible from the upper side of the fabric.

Source: www.youtube.com

This was performed on a brother pe500 4x4 machine, however it will work on just abou. Look at the new needle and note the flat side of the shank.

Pull A Few Inches (About 6 Inches Or So) Of Thread Thru The Needle And Wrap It Around The Hook Of The Gauge At Least Twice.

Adjust your tension to 4 and see if that makes a difference. Some may say they are not required on embroidery machines, but with the speeds achieved on brother embroidery machines today, they do make a difference. Refer to combination of fabric, thread and needle.

This Tells You That The Top Yarn Was So Tight That It Started To Pull The Bobbin Thread Through The Holes And Can Even Cause The Fabric To Fray.

Learn how to correct thread tension so that your stitches come out perfect no matter the type of fabric you're sewing with. (1) wrong side of fabric. Adjusting embroidery tension the easy way!

If The Tension Is Too Tight Or Even Too Loose, It Can Cause The Machine To Lose Its Thread.

The top thread is too tight. Join my live every friday at 8pm. Follow the below instructions if you need to adjust the bobbin tension.

When The Thread Tension Is Incorrect, Check The Machine According The Following Procedure.

If you are still experiencing problems with loops on your material, take your. The upper thread appears as a straight line on the upper side of the fabric. (refer to illustration below) the upper thread appears as a straight line on the right side of the fabric.

When The Tension Is Perfect, The Thread Only Drops A Few Inches.

If the stitches appear loose, turn the tension up one notch and embroider again. Know your top thread tension; To increase the tension, turn it to right side.